AEROSOL PARTICLE MONITOR – MODEL AES-1000
Request QuoteAerosol Particle Monitor for detecting particulates of 0.5 microns and larger
The Kanomax Aerosol Particle Monitor features an easy-to-read display, can connect to a network via ethernet, and offers simplified monitoring of particulates at multiple locations.
- Stable and sensitive detection for Particulates of 0.5 microns and larger. Easy-to-read air cleanliness level, equivalent of ISO5 / Class 100 – ISO8 / Class 100,000.
- Unique air sampling method using “heater” to generate updraft, preventing choked flow. Suction pump is not necessary.
- Alarm comes on when the setting level goes beyond the required cleanliness, while monitor gives alarm signal output.
- Link to Ethernet system with purpose of monitoring at multiple location.
- Long life laser. 20,000 hours.
- Compact and light, easy installation. Low cost.
- Monitor and verify clean rooms/Pharmaceutical/Semi Conductor/Food Industry.
- Buffer zero monitoring and management.
- IAQ investigation.
| General Specifications | |
| Display | 10 x LED lights shows equivalent of Class 100 ~ Class 100,000 |
| Detection method | Light Scattering |
| Min. detectable size | 0.5 ?m |
| Air Sampling method | Updraft airflow generated by built-in heater enables air sampling of approx. 0.26 gal per minutes |
| Cleanliness Class | From level of equiv. of ISO5 / Class 100 ~ ISO8 / Class 100,000 |
| Alarm Display | Alarm LED light comes on when reaching to setting level |
| Alarm Output | TTL open collector output in sync with alarm display |
| Interface | Ethernet x 1 port |
| PowerSupply | DC12 V +/-10% 500mA |
| Operating Condition | 0?C~40?C 30% RH~80% RH |
| Dimensions | 7.5 x 4.0 x 1.5 inches (192 x 102 x 37 mm) |
| Warranty | 1 year |
| Standard Accessories | Meter, AC adapter, Mounting plate, Operation manual |
- User Manual
- Data Sheet(English)
- Engineering Drawing
